1. product pro?le 1.1 general description planar maximum ef?ciency general application (mega) schottky barrier recti?er with an integrated guard ring for stress protection, encapsulated in a sod323f (sc-90) very small and ?at lead surface-mounted device (smd) plastic package. 1.2 features n forward current: 1a n reverse voltage: 40 v n very low forward voltage n very small and ?at lead smd plastic package 1.3 applications n low voltage recti?cation n high ef?ciency dc-to-dc conversion n switch mode power supply n reverse polarity protection n low power consumption applications 1.4 quick reference data [1] pulse test: t p 300 m s; d 0.02. PMEG4010CEJ 1averylowv f mega schottky barrier recti?er in a sod323f package rev. 01 13 april 2006 product data sheet table 1. quick reference data symbol parameter conditions min typ max unit i f forward current t sp 55 c --1a v r reverse voltage - - 40 v v f forward voltage i f = 1000 ma [1] - 490 570 mv
PMEG4010CEJ_1 ? koninklijke philips electronics n.v. 2006. all rights reserved. product data sheet rev. 01 13 april 2006 2 of 9 philips semiconductors PMEG4010CEJ 1 a very low v f mega schottky barrier recti?er in a sod323f package 2. pinning information [1] the marking bar indicates the cathode. 3. ordering information 4. marking 5. limiting values [1] device mounted on an fr4 printed-circuit board (pcb), single-sided copper, tin-plated and standard footprint. [2] device mounted on an fr4 pcb, single-sided copper, tin-plated, mounting pad for cathode 1 cm 2 . table 2. pinning pin description simpli?ed outline symbol 1 cathode [1] 2 anode 2 1 sym001 12 table 3. ordering information type number package name description version PMEG4010CEJ sc-90 plastic surface-mounted package; 2 leads sod323f table 4. marking codes type number marking code PMEG4010CEJ ep table 5. limiting values in accordance with the absolute maximum rating system (iec 60134). symbol parameter conditions min max unit v r reverse voltage - 40 v i f forward current t sp 55 c-1a i frm repetitive peak forward current t p 1 ms; d 0.25 - 7 a i fsm non-repetitive peak forward current square wave; t p =8ms -10a p tot total power dissipation t amb 25 c [1] - 350 mw [2] - 830 mw t j junction temperature - 150 c t amb ambient temperature - 65 +150 c t stg storage temperature - 65 +150 c
PMEG4010CEJ_1 ? koninklijke philips electronics n.v. 2006. all rights reserved. product data sheet rev. 01 13 april 2006 3 of 9 philips semiconductors PMEG4010CEJ 1 a very low v f mega schottky barrier recti?er in a sod323f package 6. thermal characteristics [1] for schottky barrier diodes thermal runaway has to be considered, as in some applications the reverse power losses p r are a signi?cant part of the total power losses. nomograms for determining the reverse power losses p r and i f(av) rating are available on request. [2] device mounted on an fr4 pcb, single-sided copper, tin-plated and standard footprint. [3] device mounted on an fr4 pcb, single-sided copper, tin-plated, mounting pad for cathode 1 cm 2 . [4] soldering point of cathode tab. 7. characteristics [1] pulse test: t p 300 m s; d 0.02. table 6. thermal characteristics symbol parameter conditions min typ max unit r th(j-a) thermal resistance from junction to ambient in free air [1] [2] - - 350 k/w [1] [3] - - 150 k/w r th(j-sp) thermal resistance from junction to solder point [4] - - 55 k/w table 7. characteristics t amb =25 c unless otherwise speci?ed. symbol parameter conditions min typ max unit v f forward voltage [1] i f = 1 ma - 210 240 mv i f = 10 ma - 270 310 mv i f = 100 ma - 340 390 mv i f = 500 ma - 420 490 mv i f = 700 ma - 450 520 mv i f = 1000 ma - 490 570 mv i r reverse current v r = 5 v - 0.8 - m a v r = 10 v - 1.1 - m a v r =40v - 6 50 m a c d diode capacitance v r = 1 v; f = 1 mhz - 69 77 pf
PMEG4010CEJ_1 ? koninklijke philips electronics n.v. 2006. all rights reserved. product data sheet rev. 01 13 april 2006 4 of 9 philips semiconductors PMEG4010CEJ 1 a very low v f mega schottky barrier recti?er in a sod323f package (1) t amb = 150 c (2) t amb = 125 c (3) t amb =85 c (4) t amb =25 c (5) t amb = - 40 c (1) t amb = 150 c (2) t amb = 125 c (3) t amb =85 c (4) t amb =25 c (5) t amb = - 40 c fig 1. forward current as a function of forward voltage; typical values fig 2. reverse current as a function of reverse voltage; typical values t amb =25 c; f = 1 mhz fig 3. diode capacitance as a function of reverse voltage; typical values 006aaa755 10 1 10 3 10 2 10 4 i f (ma) 10 - 1 v f (v) 0.0 0.8 0.6 0.2 0.4 (1) (2) (3) (4) (5) 006aaa756 v r (v) 040 30 10 20 10 - 1 10 - 3 10 3 10 10 5 i r ( m a) 10 - 4 (1) (2) (3) (4) (5) 10 - 2 10 2 10 4 1 v r (v) 040 30 10 20 006aaa757 80 40 120 160 c d (pf) 0
PMEG4010CEJ_1 ? koninklijke philips electronics n.v. 2006. all rights reserved. product data sheet rev. 01 13 april 2006 5 of 9 philips semiconductors PMEG4010CEJ 1 a very low v f mega schottky barrier recti?er in a sod323f package 8. package outline 9. packing information [1] for further information and the availability of packing methods, see section 14 . 10. soldering fig 4. package outline sod323f (sc-90) 04-09-13 dimensions in mm 0.80 0.65 0.25 0.10 0.5 0.3 2.7 2.3 1.8 1.6 0.40 0.25 1.35 1.15 1 2 table 8. packing methods the indicated -xxx are the last three digits of the 12nc ordering code. [1] type number package description packing quantity 3000 10000 PMEG4010CEJ sod323f 4 mm pitch, 8 mm tape and reel -115 -135 re?ow soldering is the only recommended soldering method. dimensions in mm fig 5. re?ow soldering footprint sod323f (sc-90) 001aab169 1.65 0.50 (2 ) 2.10 1.60 2.80 0.60 3.05 0.50 0.95 solder lands solder resist occupied area solder paste
PMEG4010CEJ_1 ? koninklijke philips electronics n.v. 2006. all rights reserved. product data sheet rev. 01 13 april 2006 6 of 9 philips semiconductors PMEG4010CEJ 1 a very low v f mega schottky barrier recti?er in a sod323f package 11. mounting pcb thickness = 1.6 mm pcb thickness = 1.6 mm fig 6. fr4 pcb, standard footprint fig 7. fr4 pcb, mounting pad for cathode 1cm 2 006aaa487 40 dimensions in mm 0.6 0.6 0.5 0.6 43.4 0.6 006aaa488 40 0.6 0.6 10 0.5 10 43.4 dimensions in mm
PMEG4010CEJ_1 ? koninklijke philips electronics n.v. 2006. all rights reserved. product data sheet rev. 01 13 april 2006 7 of 9 philips semiconductors PMEG4010CEJ 1 a very low v f mega schottky barrier recti?er in a sod323f package 12. revision history table 9. revision history document id release date data sheet status change notice supersedes PMEG4010CEJ_1 20060413 product data sheet - -
PMEG4010CEJ_1 ? koninklijke philips electronics n.v. 2006. all rights reserved. product data sheet rev. 01 13 april 2006 8 of 9 philips semiconductors PMEG4010CEJ 1 a very low v f mega schottky barrier recti?er in a sod323f package 13. legal information 13.1 data sheet status [1] please consult the most recently issued document before initiating or completing a design. [2] the term short data sheet is explained in section de?nitions. [3] the product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple dev ices. the latest product status information is available on the internet at url http://www .semiconductors .philips .com. 13.2 de?nitions draft the document is a draft version only. the content is still under internal review and subject to formal approval, which may result in modi?cations or additions. philips semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. short data sheet a short data sheet is an extract from a full data sheet with the same product type number(s) and title. a short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. for detailed and full information see the relevant full data sheet, which is available on request via the local philips semiconductors sales of?ce. in case of any inconsistency or con?ict with the short data sheet, the full data sheet shall prevail. 13.3 disclaimers general information in this document is believed to be accurate and reliable. however, philips semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. right to make changes philips semiconductors reserves the right to make changes to information published in this document, including without limitation speci?cations and product descriptions, at any time and without notice. this document supersedes and replaces all information supplied prior to the publication hereof. suitability for use philips semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of a philips semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. philips semiconductors accepts no liability for inclusion and/or use of philips semiconductors products in such equipment or applications and therefore such inclusion and/or use is for the customers own risk. applications applications that are described herein for any of these products are for illustrative purposes only. philips semiconductors makes no representation or warranty that such applications will be suitable for the speci?ed use without further testing or modi?cation. limiting values stress above one or more limiting values (as de?ned in the absolute maximum ratings system of iec 60134) may cause permanent damage to the device. limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the characteristics sections of this document is not implied. exposure to limiting values for extended periods may affect device reliability. terms and conditions of sale philips semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www .semiconductors .philips .com/pro? le/ter ms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by philips semiconductors. in case of any inconsistency or con?ict between information in this document and such terms and conditions, the latter will prevail. no offer to sell or license nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. 13.4 trademarks notice: all referenced brands, product names, service names and trademarks are the property of their respective owners. 14. contact information for additional information, please visit: http://www.semiconductors.philips.com for sales of?ce addresses, send an email to: sales.addresses@www.semiconductors.philips.com document status [1] [2] product status [3] de?nition objective [short] data sheet development this document contains data from the objective speci?cation for product development. preliminary [short] data sheet quali?cation this document contains data from the preliminary speci?cation. product [short] data sheet production this document contains the product speci?cation.
philips semiconductors PMEG4010CEJ 1 a very low v f mega schottky barrier recti?er in a sod323f package ? koninklijke philips electronics n.v. 2006. all rights reserved. for more information, please visit: http://www.semiconductors.philips.com. for sales office addresses, email to: sales.addresses@www.semiconductors.philips.com. date of release: 13 april 2006 document identifier: PMEG4010CEJ_1 please be aware that important notices concerning this document and the product(s) described herein, have been included in section legal information. 15. contents 1 product pro?le . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 general description. . . . . . . . . . . . . . . . . . . . . . 1 1.2 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.3 applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.4 quick reference data. . . . . . . . . . . . . . . . . . . . . 1 2 pinning information . . . . . . . . . . . . . . . . . . . . . . 2 3 ordering information . . . . . . . . . . . . . . . . . . . . . 2 4 marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 5 limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 6 thermal characteristics. . . . . . . . . . . . . . . . . . . 3 7 characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3 8 package outline . . . . . . . . . . . . . . . . . . . . . . . . . 5 9 packing information. . . . . . . . . . . . . . . . . . . . . . 5 10 soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 11 mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 12 revision history . . . . . . . . . . . . . . . . . . . . . . . . . 7 13 legal information. . . . . . . . . . . . . . . . . . . . . . . . 8 13.1 data sheet status . . . . . . . . . . . . . . . . . . . . . . . 8 13.2 de?nitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 13.3 disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 13.4 trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 14 contact information. . . . . . . . . . . . . . . . . . . . . . 8 15 contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
|
